Our Blog

Learning More About Spray Foam Insulation

Spray foam is a great product. Spray foam-insulated houses are among the most comfortable homes today. These buildings are thoroughly sealed by fiberglass once the spray foam is properly installed. Spray foam has two types, open cell and closed cell. Both offer an air barrier and an insulation mechanism. The structural layer encircles the conditioned space completely and the insulation touches the air barrier. Because spray foam insulation comes with an air barrier, it ensures proper separation and air synchronization.

However, there are issues with spray foam insulation that are commonly observed. If you want to get spray foam insulation Dallas done right, then you must talk to the experts. Here are some of the issues you may encounter. Be sure that you call an expert right away if you observe any of these.

1. There’s not enough spray foam density.

The foam in the cell closure is more popular, but it has also cell-open foam. With cell-closed foams, the higher R-value per allows the installer to spray into 2-inch walls and 3-inch root rows to satisfy the energy code requirements of R-13 and R-19.

Open-cell foam normally fills the frame area, so it’s easy to tell whether the contractor has adequately sprayed. Closed cellular foam does not cover the space, so you must find a few places to make sure that you’re not shortened.

2. Some of the moisture escape in that area was overlooked by spray foam installers.

The problem was that a few places had been taken over by the installers on the soffit above the bedroom, and the hole around the ceiling of the tray enabled the humid air to enter the room with the natural compression of the cold surface.

For this instance, the packet must be sealed tightly. One of the biggest sales factors of spray foam is its ability to seal the air but it can’t seal the part where it is not sprayed. One of the nice things about a new design is that the blower door can be tested. The leaks can still be tested on a fog machine.

3. Sprinkler moisture installers were unable to spray the building sufficiently.

In complex structures, the exact location of the building envelope can be a concern. An air leak may or may not occur but if the contractor fails in this area, the problem most certainly is about insulating the thermal bypass. A big part of the structure envelope must be separated, or heat loss will occur.

Another problem is when the contractor sprays extra foam. Since it was not known whether the building is enveloped, the boundary between conditioned and unconditioned space, can’t be located. The foam wall should be placed on both sides of the walls.

4. Sprinkle with foam contracts and continue to deteriorate.

This problem could be triggered by a bad batch of products, and an inaccurate combination of which, or high temperature. It’s not a good thing, regardless of the cause. A small area with this problem adds up to a lot of heat loss, and it may affect the entire room.

Paving Tips and Tricks Everyone Should Know

Will you trust a contractor if he or she tells you that your choice of paving material could be the most important decision in the construction of your garden? Think about it. Sometimes you can touch a plant, open the door, or sit on a piece of garden furniture, but your legs almost always touch the garden surface. Paving objects, such as the driveway, contribute to your landscape color, texture, and pattern. In comparison to plants growing, flowering, and relaxing on the landscape, paved surfaces contribute equally throughout the year.

There are two broad categories of paving materials mostly used these days, such as carved stone and composite materials. Curated stone is created by splitting, cutting or crushing, just like granite and slate. Composite materials, such as brick and pre-cast concrete floors, are manufactured and molded when they are solid, fired or allowed to dry.

Common Paving Materials

The wide array of paving materials makes shopping and building enjoyable, but the number of choices can also be daunting. Each one has its advantages and disadvantages and some are more suitable than others for specific uses and locations. You will make the right decision for your climate and budget by understanding and checking your choices.

The ranges of costs given are mean prices for raw materials available before installation by suppliers in the United States. Expect some variability from one area to another. The cost ranges are based on the 2007 prices, but can still be used in the comparison of the different materials.

Stone Paving Option

Stone is one of the most expensive and versatile paving materials. It is durable and versatile, with a wide variety of colors, shapes, and sizes. There is a stone in the garden for every scenario, from flagstones for country-garden paths to detailed geometric blocks for a formal patio. But all this comes at a price. Stone can be costly to purchase and build. Paving stone’s consistency and prices vary between regions depending on the quantity and the distance from the source.

There are a few things to remember while buying the paving stone. A minimum thickness of two inches is sufficient to accommodate regular foot traffic and avoid settlement of weather vagaries. Think rounded pavilions and flagstones with a smooth or sharp finish that may be slim when wet and rough on the ankles. Instead, use flat stones with a naturally obstructing surface to give a certain grip or texture.

How to Get the Best Landscape Paving

Until you make a costly commitment to any material, test its color when it is damp. That lovely paving, with so much granite that you like, could make the rain look golden orange. Likewise, if moisture accentuates, a subtle pattern in your sandstone can become objectively audacious.

To make sure that you’re getting the best look and deal for your paving project. A trustworthy residential paving company will make sure that you’ll get the best bang for your buck. Hire the best one or get quotes from at least three different service providers so you can compare.

Fence Installation Tips and Tricks

If you just moved to your lovely new home, your children may want to play in your big backyard. The problem is, your house doesn’t have a fence. Regardless if have young children, a pet, or if you want your yard to have a full sense of security, you’ll probably consider building a fence.  

If your home doesn’t have a fence yet or if you don’t want the one already installed, then adding a new fence is a good decision. It can protect your kids and pets, cover your swimming pool, protect the scenery, and do a lot more. The bonus is that you get the look that you want. That new fence is an important factor for luring in potential buyers in the sale of your home in the coming years.  

If you are planning to install a fence to enclose your yard, it is important that you plan well your fence construction project. Know what to expect when you start the project. Here are some tips:  

1. Contact your local building department or homeowner’s association.  

Contact the authorities for information about the fence design requirements and regulations in your area before choosing the fence contractors to hire or even choose the kind of fence to be installed. A basic fence specification to consider is fence height.  

2. Determine the fence type and materials   

You would probably need a contractor to help you with fence design as you decide which type of fence to install. Many cities need very detailed fence details, including the design, material used, and blueprint. This information must be established beforehand. If fencing contractors are hired, then they must file the fencing permit and include its cost in the estimate.  

3. Know your reason for installing a fence.   

Remember why in the first place you need a fence. Determine the primary functions of the fence. Will you use it to secure the pool? It helps you in figuring out what kind of fence you are going to install. For those whose main aim is to keep kids and animals safe, your best bet may be to install strong and durable chain-link fences. You may need to find a good quality wood fence if you want to maximize security. If you need something beautiful to enhance your garden and highlight the elegance of your home, then an ornamental vinyl or metal fence will suit you.  

4. Function first.   

You may also have more than just one reason to install a fence. If you want to ensure your children’s safety, then you put the rail around the swimming pool. For this, a tall wooden fence with a tightly spaced board must be installed. Find out what neighbors have built-in such situations or contact a local fence expert if you need help to find the fence that is right for you.  

5. Choose the kind of fence and materials that best suit your needs.  

After you have decided on the primary function of the fence. Then you’re down to choosing the contractors who can provide you with services that won’t break the bank. You want to hire Greeley fence contractors who can provide you with quality services at the best rates.